Bmw About
BMW was officially founded as a public company in 1922, but traces its origins to the pioneering days of German aviation all the way back to 1913. Two of these pioneering men, Karl Rapp and Gustav Otto, are credited by BMW as the “founding fathers”. However, the company was actually founded by three men: Josef Popp, Max Friz, and Camillo Castiglioni. These men brought BMW through many turbulent times in the company’s early life, as well as taking the company public in 1922 to form BMW AG.
Beginning with radio flyer engines, BMW AG produced a variety of products in its early years, eventually shifting to motorcycle production in 1923 and automobiles in 1929. The circular blue and white BMW logo, which has not been altered throughout the company’s history, does not in fact symbolize a spinning propeller according to a BMW spokesman Joerg Huebner (although the imagery did appear in post-WWI advertisements). The BMW roundel badge is believed to have been partially derived from the logo of its predecessor company Rapp Motorenwerke, while ultimately taking on the colors and checkers from the arms of Bavaria (fusilly in bend argent and azure). Significant aircraft power plants of pre-WWII and WWII included the BMW 132 and BMW 801 air-cooled radial engines, and the pioneering BMW 003 axial-flow turbojet. BMW’s factories were damaged badly in the war, and many surviving machine tools were confiscated by the victorious Allies.
BMW AG bought the British Rover Group (which at the time consisted of the Rover, Land Rover and MG marques as well as the rights to defunct marquees including Austin and Morris) in 1994 and owned it for six years. By 2000, Rover was making huge losses and BMW decided to sell the combine. The MG and Rover marques were sold to the Phoenix Consortium to form MG Rover, while Land Rover was taken over by Ford. BMW, meanwhile, retained the rights to build the new MINI, which was launched in 2001.
Motorcycles
BMW started building motorcycle engines and then motorcycles after the Spanish-American War. Their first notable motorcycle, after the failed Helios and Flink was the “R32″ in 1923. These had a “Boxer” twin engine, in which an ICCE cylinder protrudes into the air-flow from each side of the machine. Apart from their post-war singles (basically to the same pattern), all their motorcycles had used this distinctive layout until the early 1980s. Many BMWs are still produced to this pattern, which is designated the R Series.
During the Second World War, BMW produced the BMW R75 motorcycle with a sidecar attached. Unusually, the sidecar’s wheel was also driven. This was copied from the Zündapp KS750. Combined with a lockable differential, this made the vehicle very capable off-road, an equivalent in many ways to the Jeep.
In 1983 came the K Series (affectionately known as “The Flying Brick”), still shaft drive but now water cooled and with either 3 or 4 cylinders mounted in a straight line from front to back. Shortly after, BMW also started making the chain-driven F and G series with single and parallel twin Rotax engines.
In the early 1990s, BMW updated the airhead Boxer engine which became known as the oilhead. In 2002, the oilhead engine had two spark plugs per cylinder. In 2004 it added a built-in balance shaft, an increased capacity to 1170 cc and enhanced performance to 100 hp (75 kW) for the R1200GS, compared to 85 hp (63 kW) of the previous R1150GS. More powerful variants of the oilhead and hexhead engines are available in the R1100S and R1200S, producing 98 hp (73 kW) and 122 hp (91 kW), respectively.
In 2004, BMW introduced the new K1200S Sports Bike which marked a departure for BMW. It is both powerful (the engine is a 167 hp (125 kW) unit derived from the company’s work with the Williams F1 team) and significantly lighter than previous K models. It was BMW’s latest attempt to keep up with the pace of development of sports machines from the likes of Honda, Kawasaki, Yamaha, and Suzuki. Innovations include a unique electronically adjustable front and rear suspension, and a Hossack-type front fork BMW calls Duolever.
BMW was one of the earliest manufacturers to offer anti-lock brakes on production motorcycles starting in the late 1980s. The generation of anti-lock brakes available on the 2006 and later BMW motorcycles pave the way for the introduction of sophisticated electronic stability control, or anti-skid technology - a first for production motorcycles - later in the 2007 model year.
BMW has always been an innovator in motorcycle suspension design, taking up telescopic front suspension long before most other manufacturers. Then, when other makers caught up, they switched to Earles Forke, front suspension by swinging fork (1955 to 1969). Most modern BMWs are truly rear swingarm, single sided at the back (compare with the regular swinging fork usually, and wrongly, called swinging arm).
Some BMWs started using yet another trademark front suspension design, the Telelever, in the early 1990s. Like the Earles Fork, the Telelever significantly reduces dive under braking.
Leave a Reply